This DSO138 oscilloscope kit is Welded(Assembled), can be used directly. It contains only the basic oscilloscope functions with no fancy features. Simplicity in structure and easiness in assembly/operation are among the main targets of the design. DSO138 oscilloscope DIY kit major features: Analog bandwidth: 0 - 200KHz Sampling rate: 1Msps max Sensitivity: 10mV/Div - 5V/Div Sensitivity error: < 5% Vertical resolution: 12-bit Timebase: 10us/Div - 500s/Div Record length: 1024 points Built-in 1KHz/3.3V test signal Waveform frozen (HOLD) function available NOTE: 9V DC power supply required. Not included. Package contents: 1 x DSO138 DIY Digital Oscilloscope Kit 1 x Probe 1 x User Manual(English)
This DSO138 oscilloscope kit is full assembled, can be used directly, not DIY KIT!
DSO138 was designed as a training oscilloscope. With automatic, regular and one-shot mode, easy to capture the moment waveform. Circuit is simple, reliable, inexpensive.
It uses 2.4-inch TFT LCD (320 X 240 dot-matrix, 262K colors) as its display element and displays nice.
Adjustable vertical displacement, and with instructions, which increase the likelihood of adding different features or developing new applications on the hardware for users.
This DSO138 MCU has been pre-programmed and no re-programming required, partially open-sourced.