Type: function signal generator
Frequency: 150 (MHz)
Weight: 4 (kg)
A) High frequency signal generator
Frequency range: A 100KHz - 300KHz / B 300KHz -1000KHz / C 1MHz -3.2MHz / D 3.0MHz -10MHz / E 10MHz - 35MHz / F 32MHz -150MHz (3rd harmonic reaches 450MHz)
Frequency accuracy: Reading accuracy is three decimal places
High frequency output: 100mVrms, (approx. 35MHz)
Output control: 0dB/20dB and fine-tuning
Modulation: Internal 1KHz / External 50Hz-20KHz, (less than 1Vrms)
Audio output: 1KHz (fixed), minimum 1Vrms
Power supply: 220Vac ± 10% 50Hz
B) Frequency meter
Frequency range: low frequency 10Hz to 10MHz / high frequency 10MHz to 150MHz
Input voltage: less than 50mV
Maximum input voltage: less than 3V RMS
Gate time: 1s
Accuracy: low frequency 1Hz / high frequency 10Hz
Input impedance: low frequency 1M? / high frequency 50?
Working temperature: 0 to 40°C
Instructions for use
1. Ready to operate
1) The power switch is set to "Off".
2) Connect the power cord and plug in the plug.
3) Connect the high-frequency signal output line to the "output" terminal.
4) Select the frequency range and adjust the frequency knob to achieve the desired frequency.
5) The output line should be as short as possible to avoid unwanted noise. Long shielded lines reduce the frequency response of high frequency bands, especially when using square waves.
When the signal line is connected to the output, the red line is high (or fire line), and the black line is ground and connected to the chassis.
If the high frequency signal is to be connected to the antenna input of the receiver, a 50 to 200 ? resistor should be connected in series. If receiving
SG-4162AD function signal generator is suitable for scientific research and experiment of electronic circuit and pulse circuit.
2. 8-digit number showing the frequency of internal or external signals
3. Built-in frequency meter, can measure external signal frequency 10Hz~150MHz
Feature description: 1. Signal generator frequency range 100KHz~150MHz
Our store is always aimed at customer satisfaction. If you have any problem, please contact us. We will reply your question as soon as possible. We will deliver the goods to you within 48 hours after the inspection.