Specifications?
Frequency range:
X1 range:10Hz-100Hz
X10 range:100Hz-1KHz
X100rang:1KHz-10KHz
X1K range:10KHZ-100KHz
X10K range:100KHz-1MHz
Sine wave characteristics
Output voltage: 5V rms or more
Output distortion: 400Hz-20KHz, 0.1% or less
(X100 range for 1KHz)
50Hz-500KHz 0.5% or less
Output Flatness: ±1.5 dB (refer to 1KHz)
Square wave characteristics:
Output voltage: 10Vp.p or more
Rise time: 0.25 us or less
Duty ratio: 50%±5%(referto1KHz)
External synchronization characteristics
Range±3% of oscillator frequency
Inpu impedance: 10K approximate
Maxi mun input: 10V rms
Output characteristics:
Impedance: 600?±10%
Attenuator: 0dB, -10dB, -20dB, -30dB, -40dB, and -50dB in 6 steps (accuracy +1 dB at 600? load)
Power requirement:
Input: AC 110V or 220V, 50/60Hz
Consumption: 5 Watt
Dimension:142(w)*233(D)*197(H) mm
Weight:3.5Kg
Features:
Reliable circuitry insure high stability and accuracy
Easy operation on vertical type panel assembling
Frequency range from 10Hz to 1MHz selectable in 5 ranges are calibrated with single-scale graduations.
More than 5Vrms at no load and more than 2.8Vrms on 600? loading (sine wave).
Output level can be adjusted by a 10dB-step, 6 range attenuator and a level adjuster.
Sine wave and square waves is available.
Synchronizing input terminal
Application:
1) Using as sine wave oscillator
2)Measurement of amplifier gain
3) Measurements of phase characteristic
4)Using as square wave oscillator
Accessories:
1pc Power cord
1pc Test clip
1pc Instruction manual
?Reliable circuitry insure high stability and accuracy.
?Easy operation on vertical type panel assembling.
?Frequency range from 10Hz to 1MHz selectable in 5 ranges are calibrated with single-scale graduations.
?More than 5Vrms at no load and more than 2.8Vrms on 600? loading (sine wave). Output level can be adjusted by a 10dB-step, 6 range attenuator and a level adjuster.
?Application:Using as sine wave oscillator,Measurement of amplifier gain,Measurements of phase characteristic,Using as square wave oscillator.