Waveform Signal Generator,AC100-240V FY6800 Double Channel DDS Function Arbitrary Waveform Signal Generator(US 30MHz)

Price: $105.99
Product prices and availability are accurate as of 2020-12-15 11:59:36 UTC and are subject to change. Any price and availability information displayed on https://www.amazon.com/ at the time of purchase will apply to the purchase of this product.
Availability: Not Available Discontinued

Manufacturer Description


The back panel of FY6800is as picture 1-2 below. 4 BNC terminals on the left are DC coupling measuring terminals Trig/FSK/ASK/PSK IN, external sweep input VCO IN, Synchronization output connector SYNC OUT, and Synchronization input connector SYNC IN. Then follows TTL output terminal, USB terminal, power switch and power input socket.

1. BNC connector
Trig/FSK/ASK/PSK IN: DC coupling measuring terminal and ASK/PSK/FSK modulation trigger input terminal.
VCO IN: External signal sweep input terminal can realize voltage controlling frequency, voltage controlling amplitude, voltage controlling offset, voltage controlling duty cycle and so on. Frequency of external signal input should be lower than 500 Hz.
SYNC OUT: Synchronization signal output terminal.
SYNC IN: Synchronization signal input terminal.
2. TTL signal output
Frequency of Port A is same with frequency of CH1 output. Frequency of Port B is same with frequency of Port A but with reverse phase (180°). Frequency of Port C is same with frequency of CH2. Frequency of Port D is same with Port C but with reverse phase (180°).
3. USB Device interface
It's for communication with PC (This is a USB-TTL serial port and driver is needed). Can program by host computer.
4.Power switch&Power input socket(voltage range AC100V-AC240V).

Package list:

1 x FY6800 signal generator
1 x USB communication cable
1 x BNC test cable
1 x Q9 clip cable
1 x Power cable

Product Features

Adopt the Direct Digital Synthesizer (DDS) technology and provide stable, precise, pure and low distortion signals.Equipped with channel tracking function, when the tracking function is turned on, all parameters of both channels can be updated according to the user's configuration at the same time.No range limit: The full range of frequency is not divided into gear switches, program-controlled settings Desktop design with ABS plastic housing, AC 100 - 240V (AC) wide voltage supply; Two or more instruments can synchronize multiple instruments through the SYNC port.The phase adjustment range of the two channels is 0~359.99°, and the adjustment accuracy is 0.01° 2.4 inch TFT Color LCD with 320x240 resolution, displaying parameters and graphics of the two channels at the same time.Up to 98 sets of function/arbitrary waveforms can be output, including 34 sets of preset waveforms and 64 sets of user-defined waveforms. Preset waveforms include: sine wave, square wave (duty ratio adjustable), triangle wave.Burst Output Function The instrument uses 14-bit high-speed D/A converter chip (5Vpp output quantization error is less than 1mV), 250MSa/s sample rate, 14bits vertical resolution.Enable to store 64 arbitrary waveform data files, each one of waveform storage depth 8192 points * 14bits.High frequency accuracy: Frequency accuracy can reach 10-6 orders of magnitude.The duty cycle of both channels can be adjusted independently, with an accuracy of 0.01% Fully independent dual-channel output (equivalent to two independent signal sources), able to work synchronously, and the phase difference can be accurately adjusted;The frequency resolution is relatively high: the full-range frequency resolution is 1uHz (0.000001Hz).Amplitude resolution is higher: Amplitude resolution can be as low as 1mV (0.001V);With -10V~+10V DC bias function (<20MHz), resolution up to 1mV;