Tibbo TPS-Based 4-Port Modbus Gateway

Price: $156.00
Product prices and availability are accurate as of 2020-11-26 14:03:24 UTC and are subject to change. Any price and availability information displayed on http://www.amazon.com/ at the time of purchase will apply to the purchase of this product.
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Manufacturer Description

Tibbo Modbus Gateways seamlessly route Modbus requests and replies between Modbus TCP, Modbus ASCII, and Modbus RTU masters and slaves. The flexibility and adaptability of our Modbus Gateways allow you to use them in practically any Modbus system.

TPS configurations below implement 4-port Modbus Gateways suitable for most applications. TPS2-based devices are more compact and can be ordered with displays. Having an LCD allows the device to show useful status information. TPS3-based devices are wider and can accommodate up to four full serial ports. All configurations can be ordered with or without Wi-Fi ports.

Because Tibbo Project System devices are modular, you can easily customize your Modbus Gateway. For example, you can mix different port types in a single device, change the number of ports, the type of connectors, choose a different power supply, decide if you need a Wi-Fi interface, and so on.

TPS-based Modbus Gateways are supplied with a full-featured open source Modbus gateway application.

  • Support for Modbus exceptions:
    • Timeout exception;
    • Routing error exception.
  • Configuration:
    • Via the DS Manager utility;
    • Via the web interface.
  • Status indication:
    • Using LEDs;
    • On a display (when present).
  • 12V or 24V power; Optional PoE power.
  • Open-source firmware(Tibbo C application).

Product Features

Up to four RS232 or RS232/485 ports; Baudrates of up to 460,800bps; None*/even/odd/mark/space parity modes; 7* or 8 bits/character; Optional RTS/CTS flow control; Routing of Modbus TCP, ASCII, and RTU requests in any direction; Slave ID-based routing (works for all types of Modbus Masters); TCP port-based routing (for Modbus TCP Masters only); four ports are available; 100/10Mb Ethernet port; Support for WEP/WPA/WPA2 security; Automatic switchover to the Wi-Fi port whenever the Ethernet interface becomes inactive (the Ethernet cable is unplugged). configure via web interface and DS Manager utility; Support for up to 8 TCP masters and up to 4 TCP slaves; Selection of static IP or IP configuration via DHCP; Gateway configuration can be monitored using SNMP protocol; Gateway activity and byte-level flow can be monitored using IO Ninja software running a specially designed plugin.