TFCFL TAG-101D Digital Display Signal Generator 6 Phases 0.2Hz~2MHz Frequency

Price: $75.00
Product prices and availability are accurate as of 2020-10-22 12:28:22 UTC and are subject to change. Any price and availability information displayed on http://www.amazon.com/ at the time of purchase will apply to the purchase of this product.
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Product Features

Sine wave message caused by the appliance depends on output wave shape be set;The output message will be regulated by te buffer of the machine at first and regulated attenuator has 0-60dB setting range on the 60? impedance. Wen family bridge adapted on the main body of the shaking & burning appliance,set the phases used for regulated electric capacity. The buttons set on the board may change frequency within the range;Amortized amplifier is a wo phase direct current amplifier, offer the output pole about low impedance. Because of using non-linearity hearing resistance on minus direction for turning wheel, our machine can do the sine wave shape steadily in no time with the lowest distortion;Adapt Smith Special integer circuit on square wave integer appliance and high speed rising and descending square wave will be produced. Output pole is push-pull direct current amplifier and can offer low impedance output circuit within DC-1KHz;Output voltage balance may be adjusted by 2 absolute attenuator every 20dB and 40dB or in 60dB series on 600? loads. The machine offer ±24V for power supply for choosing alternating current 110V or 220V.because of adapting steady voltage, it can offer steady output within setting range in spite of alternating current unsteady.