Model: FY6800-60M
Sine: 0 ~ 60 MHz
Square: 0 ~ 25 MHz
Ramp, Triangle: 0 ~ 10 MHz
Pulse: 0 ~ 10 MHz
TTL/CMOS: 0 ~ 20 MHz
Arbitrary Waveform: 0 ~ 10 MHz
Advantage:
1. FY6800 user interface displays the parameters and waveforms of the two channels at the same time. Each function has a separate user interface different contents will be displayed when different functions are enabled.
2. The instrument uses 14-bit high-speed D/A converter chip (5Vpp output quantization error is less than 1mV), 250MSa/s sample rate, 14bits vertical resolution.
3. Enable to store 64 arbitrary waveform data files, each one of waveform storage depth 8192 points * 14bits;
Package Included:
1 x FY6800-60M DDS Signal Generator
1 x Power Cable
1 x USB Data Cable
1 x BNC-BNC Cable
2 x Q9 Clip Cables
DESCRIPTION:FY6800 series Dual-channel Function / Arbitrary waveform generator is a set of Function Signal Generator, Arbitrary Waveform Generator, Pulse Generator, Analog / Digital modulator, VCO, Sweep, Counters and Frequency Meter and other functions in a high Performance, cost-effective, multi-function signal generator.
CONVERTER CHIP:The instrument uses 14-bit high-speed D/A converter chip (5Vpp output quantization error is less than 1mV), 250MSa/s sample rate, 14bits vertical resolution
SWEEP FUNCTION: It can sweep 4 properties of signals including frequency, amplitude, offset and duty cycle; It has Linear and Logarithm two sweep types; 0.01S~999.99S sweep time; Up, Down and roundtrip sweep directions
COMMUNICATING FUNCTION: All functions can be controlled by PC program and the communication protocol is open for secondary development
SUPPORTED:Two or more signal generators connected to achieve multi-channel output, the maximum support 16-channel synchronous output, the phase between each channel can be adjusted