SainSmart UDB1002S DDS Signal Generator, 2MHz Sweep Function Source Rev3.0 PC Serial Ports COMM

Price: $33.99 $31.99
Product prices and availability are accurate as of 2019-05-25 04:59:53 UTC and are subject to change. Any price and availability information displayed on http://www.amazon.com/ at the time of purchase will apply to the purchase of this product.
You Save: $2.00 (6%)
Availability: In Stock
Usually ships in 24 hours
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Manufacturer Description

This is a complete DDS signal source, Adopts DC5V power supply, can output the sine wave, square wave (Duty cycle Can be adjust from1% -99%) , triangle wave and sawtooth wave and various function wavefrom, maximum output can reach up to 10 Vpp, frequency range from 0.01 Hz-2 MHz .Resolution for 10 MHz, with TTL synchronization output and 60 MHz frequency meter.

Specifications:

* MAX Frequency:2MHz
* Wave form:sine wave, square wave,triangle wave and sawtooth wave
* Max output:10Vpp(no-load)
* Otput Resistance: 50?±10%
* DC bias:±5V
* Duty cycle:1%-99%
* Display: LCD1602
* Output frequency range:
* sine wave: 0.01Hz-2MHz
* Square-wave: 0.01 Hz - 1MHz (the valid range)
* Triangle wave :0.01 Hz - 1MHz (the valid range)
* Sawtooth wave :0.01 Hz ~ 1MHz (the valid range)
* Resolution :0.01 Hz
* Frequency stability: + 1 x 10-6
* Frequency error :+ 5 x 10-6
* Sine wave distortion degree: < 1% (benchmark frequency 1kHz)
* Triangle wave linearity : 0.01 Hz ~ 100 KHZ 98%; 95%, 100 KHZ ~ 1MHz;
* Square-wave rising and falling time: < 30ns
* TTL output : TTL level: Vp - p. 3 p ,Take 20TTL load load capacity
* The external measurement functions:
* Frequency range: 60MHz 1Hz
* Vpp - signal amplitude: 0.5 20Vpp
* The count range: 0-4294967296
* Storage and append the: has a 10 groups with v function parameters storage

Package Content:


1 x SainSmart DDS Function Signal Generator
1 x 5V Power Supply

Manual: https://s3-ap-northeast-1.amazonaws.com/sain-amzn/20/20-010-501/20-010-501.zip

Product Features

UDB100X series direct digital synthesis signal generator use DDS technology and FPGA design with the characters of high stability and low distortion ect., It's the ideal equipment of electronic engineer, laboratory, production lines, the teaching and scientific research. The UDB100xS series adds a PC communication control functions. The serial communication from the July 19, 2011 UDB100xS Series DDS source Can connect a PC to communicate and use computer software to control instruments Should be noted that the amplitude and DC offset can not be programmed, and other functions (frequency, duty cycle, waveform set and the sweep time and the corresponding control, read outside the measurement frequency, etc.) are able to achieve the programmed function