Quimat Updated 2.4" TFT Digital Oscilloscope Kit with Power Supply and BNC-Clip Cable Probe Q15001 (Assembled Finished Machine)

Price: $42.99

As of 2020-12-14 02:42:13 UTC (more info)

Product prices and availability are accurate as of 2020-12-14 02:42:13 UTC and are subject to change. Any price and availability information displayed on https://www.amazon.com/ at the time of purchase will apply to the purchase of this product.

Availability: Not Available Discontinued

Buy Now from Amazon

View eBay Options

Product Information (more info)

View Product Details

CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Manufacturer Description

Quimat Q15001 oscilloscope is an assembled finished Machine.
Some similar products are DIY PART,needs to be assembled before using. The Quimat Q15001 oscope can be used directly to avoid problems during assembling welding process and greatly save your time!

Specification:
Number of Channel: 1
Analog Bandwidth: 0 - 200KHz
Sensitivity: 5mV/Div - 20V/Div
Sensitivity error: < 5%
Resolution: 12-bit
Input Impedance: 1M ohm
Maximum Input voltage: 50Vpk
Coupling: DC, AC, GND
Trigger Modes: Auto, Normal, Single
Trigger Types: Rising/falling edge
Trigger Position: 1/2 of buffer size fixed
Display: 2.4 inch color TFT LCD with 320 x 240 resolution
Power Supply: 9V DC (8 - 10V acceptable)
Dimension: 115mm X 75mm X 22mm
Weight: 100 gram

Package Contents:
1 * Oscilloscope
1 * BNC-clip cable
1 * Power adapter
1 * Users Manual

Kindly note:
Runs on 9V (do not use power voltage higher than 10V!)

Product Features

The sensitivity of Q15001 has been extended in both directions and is higher and wider. It reaches 5mV/div -- 20V/div. Also, this updated version can be handheld. Display and MCU are mounted on the same board (mainboard) to avoid using inter-board pin-headers. Analog channel is placed on a separated board which contains most user install parts, so the analog and digital circuits can be better separated. It has been added the rotary encoder, makes parameter adjustment more quicker and easier Quimat Q15001 oscilloscope is an Assembled finished Machine. NOT DIY PART, it can be used directly to avoid assembling welding process problems and greatly saves the assembly time. Detailed Operation instructions, troubleshooting guide and schematic are also provided