usbStick is a mini size 28 pin USB PIC IO board with 13x input, output, analog, pwm pins. Great tool for signals monitoring (as oscilloscope), data acquisition and circuit troubleshooting at 1mSec/samples period & 1mV Resolution.
13x IO Port (6x 12bit ADC pins, 2x 10 bit PWM/Freq/DAC pins)?
Serial port emulation (UART Baud Rates: 300 bps to 115.2 k?bps)
Maximum Voltage: 5Vdc
100mA current output at VDD pin with over-current protection?
Green LED - power on indicator
2x LEDs (Green, Red) - status indicator
ICSP Connector - on-board PIC programming
Switch Mode Selection - Boot or Normal mode
SmartDAQ v1.3 Features:
Sampling channel: 6x Analogs (12 bits ADC / 1mV Resolution) + 7x Digitals (Input/Output)
Maximum Sampling rate: 1KHz or 1mSec/Samples?
Sampling voltage: 0V - 5V (scalable? graph) at 5mV Resolution?
mSec: 1, 2, 5, 10, 20, 50, 100, 200, 500
Sec: ?1, 2, 5, 10, 20, 30
Min: 1, 2, 5, 10, 20, 30?, 60
Trigger Mode: Larger, Smaller, Positive edge, Negative edge
Sampling Mode: Continuous, Single?
Save Format: Text, Graphic, Both
Start Time: Normal, Once Trigger, 24-Hour Clock? (Auto Run)
End Time: Unlimited, Data Size, 24-Hour Clock? (Auto Stop)
28 Pin PIC: PIC18F2553
iCP12 firmware? can be updated using Microchip USB HID Bootloader via USB port
NO programmer is required!
Mini size, easy interfacing, high performance and user friendly device. Integrated with pic18f2553 28-pin flash usb pic mcu.
13x io port (6x 12bit adc pins, 2x 10 bit pwm/freq/dac pins), serial port emulation (uart baud rates: 300 bps to 115.2 kbps), 5Vdc maximum voltage, 100mA current output at Vdd pin with over-current protection.
Preloaded with HID bootloader and iCP12 DAQ firmware. Supported by Android Apps.
Free SmartDAQ software with 13 sampling channel [6x analogs (12 bits adc/1mV Resolution) + 7x digitals (input/output)] at 1kHz or 1mSec/samples maximum sampling rate. Sampling voltage: 0v - 5v (scalable graph) at 1mv resolution.
Free softwares provide: SmartDAQ, ioControl, serialComm, pwmGenerator, adcStream