Oscilloscope Kit, KKmoon Mini Digital Oscilloscope DIY Kit JYE Tech DSO138 SMD Parts Pre-soldered Electronic Learning Set 1MSa/s 0-200KHz

Price: $26.99
Product prices and availability are accurate as of 2021-07-08 05:24:27 UTC and are subject to change. Any price and availability information displayed on https://www.amazon.com/ at the time of purchase will apply to the purchase of this product.
Availability: Not Available Discontinued
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Product Features

??2.4-inch color TFT LCD with 320*240 resolution displays parameters clearly.Can be connected with computer for data transmission. ??Overall size of DSO138mini is only 2/3 of DSO138 so it is much more suitable for hand-held operation.DSO138mini has improvements in firmware, too. Make MCU and LCD stay in one PCB to avoid problematic pin-header connections. ??Improvements in power supply and mechanical structure, it can run on USB or a single cell 3.7V Li-ion battery. ??With Auto/Normal/Single trigger modes, easy to capture the moment waveform.Its trigger can work reliably under 10us and 20us timebase settings.Available rising or falling edge trigger.Observable previous trigger waveform (negative delay).Can freeze at any time waveform display (HOLD function).Waveform storage function: will not lose the waveform after power off. ??Short-circuit and open-circuit detection: can help the user find out the soldering error.TFT controller recognition function.All SMD parts has been soldered and the MCU has been programmed.