Sine Wave: 0Hz~25MHz.
Square Wave/Triangle Wave/Sawtooth Wave/Arbitrary Waveform/TTL Digital Signal Wave: 0Hz~6MHz.
Waveform Types: Sine/Triangle/Square/Lifting Sawtooth Wave, CMOS Digital Signal Wave and Arbitrary Waveform.
Waveform Length: 2048Points.
Sampling Rate: 200MSa/s.
Waveform Amplitude Resolution: 12 Bits.
The Min. Frequency Resolution: 10mHz.
Frequency Error: +/-5*10(-6).
Frequency Stability: +/-1*10(-6)/5 hours.
Amplitude Range(Peak to Peak): 5mVp-p~20Vp-p.
Output Impedance: 50?(+/-10%).
Amplitude Resolution: 1mVp-p (-20dB Attenuation); 10mVp-p (No Attenuation).
Offset Range: -120%~120% (The ratio of bias voltage and signal amplitude).
Bias Resolution: 1%.
Phase Range: 0~359°.
Phase Resolution: 1°.
Sine Wave Harmonic Arrived System: 40dBc(3Vpp.
Fan-out: andgt;20 TTL Load.
Rise/Fall Time: ?20ns.
Output Low Level: andlt;0.3V.
High Level: 1V~10V.
Level Rise/Down Time: ?20ns.
Waveform Quantity: 16.
Memory Depth/Group: 1KB/16.
Periodic Measurement: 20ns Resolution, the Max. Measurable 20s.
Duty Cycle Measurement: 0.1% Resolution, Measuring Range from 0.1%~99.9%.
Source Selection: 1. Ext. IN Input(AC Signal) ; 2. TTL-IN Input(Digital Signal
1 * Signal Source Generator.
1 * USB Cable.
1 * CD.
1 * TTL Expansion Board.
1 * Power Adapter.
2 * Q9 Clips Cable.
Using DDS direct digital synthesis technology to generate precise, stable and low distortion output signal
Can output arbitrary waveforms and conventional function waveforms(sine/triangle/square/sawtooth wave and TTL signal)
Signal of both channels has built-in sophisticated -20dB attenuator in order to reach the minimum amplitude resolution 1mV
With USB interface, after the connection with PC, the PC can be used to control the instrument
It's a great testing or measuring instrument for electronics engineer, electronic laboratory, teaching and researching