The display interface adopts 2.4-inch TFT color LCD, which makes the operation more intuitive and convenient.Rich keyboard shortcuts and graphical user interface simplify each operation, easy to operate.The instrument USES A 14-bit high D/A conversion chip (5Vpp output quantization error less than 1mV), A sampling rate of 250MSa/s, and A vertical resolution of 14bit.
Function of 100M frequency meter: it can measure frequency, period, pulse width and duty ratio. Scanning function: four properties of the scannable signal, including frequency, amplitude, offset and duty cycle; It has two kinds of Linear and Logarithm scanning type; Scanning time: 0.01S-9999.99S; Up, down and round trip scanning directions.
VCO function (voltage control output): it can be realized by external input signal: voltage control frequency, voltage control amplitude, voltage control offset, voltage control duty ratio and PWM modulation.The frequencies that work are 100MHz and Min. Frequency behavior: 0.01 Hz.
Counter function: there are 2 coupling measurement modes, including DC coupling and AC coupling. This design can solve the inaccurate problem of ac coupling.Surface mount technology can improve anti - interference and service life.
Output short circuit protection: when the load short circuit, all channels can work for more than 60 seconds.The instrument USES direct digital frequency synthesizer (DDS) technology to provide stable, accurate, pure and low-distortion signals.