HOLDPEAK 570D Dual Display Digital Auto-Ranging Clamp Multimeter With Diode And Continuity Test –Digital Handheld Clamp Meter Multimeter With Data Hold Backlight

Price: Click Button for Price
Product prices and availability are accurate as of 2020-10-22 23:11:40 UTC and are subject to change. Any price and availability information displayed on http://www.amazon.com/ at the time of purchase will apply to the purchase of this product.
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Manufacturer Description


Perfect Choice for Professional Electricians and HVAC Technicians

The HOLDPEAK HP-570D Digital Clamp Meter is the perfect choice for both HVAC and electrical applications due to its versatile set of features. Electricians will find it's thin, light and versatile with thinner jaws than standard clamp meters (only 0.4"/10mm thick). Its ability to measure temperature, capacitance are important features for HVAC technicians. The HP-570D meter offers thinner jaws over standard clamp meters, allowing access to tight measurement areas and still accommodating conductors up to 25 mm.
Product Features

Dual Displays - Permits simultaneous reading of amperage & voltage
AC Current to 1000A
DC Current to 30mA
DC voltage to 1000V
AC voltage to 750V
Resistance to 30M?
Capacitance to 30mF
Temperature with Type-K thermocouple probe
Continuity buzzer
Frequency measurement
Diode test
Hold and maximum reading functions
Auto ranging
Auto power off and low battery indication
Accommodates conductors up to 25 mm (1.0") in diameter
Rubber over-molded case

What's in the Box?
-- HP-570D Dual Display Digital Clamp Multimeter -- Test Leads -- Type-K Probe -- (1) 9V 6F22 Batteries (Installed) -- Soft Vinyl Carrying Case -- User's Manual

Product Features

Digital clamp meter measures alternating current (AC) to 1000A, current (DC) to 30mA, direct current (DC) voltage to 1000V and AC voltage to 750V, capacitance to 30mF, resistance to 30 megaohms, and frequency to 100 kHz Average-sensing meter provides accurate readings when measuring linear loads, where the current or voltage has a sinusoidal waveform Transformer clamp with 1" (26 mm) jaw opening measures current and frequency without touching or interrupting the circuit K-type thermocouple probe measures temperature Meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for category III installations up to 600V