AC/DC frequency range: Up to 20 kHz
Effective Measurement Range: 20mA to 65A DC
It is a transducer which allows your multimeter to measure current data and enable your oscilloscope to measure the current waveforms.
Its current transducer is composed by permalloy and hall element, which linearly transform the AC or DC current to AC or DC current voltage.
And if connect to an oscilloscope by BNC type connector, you are able to observe the current waveforms; If connect to a multimeter by banana type connector, you can obtain the current data.
Power circuit measurement and malfunction analysis;
Motor drive of frequency converter (or other electronics) measurement;
Power electronics equipments measurement.
1 mV /10mA
+/-(1.5%+/-5mA) 10mA ~ 20A
+/-(2%+/-20mA) 100mA ~ 40A
+/-(4%+/-0.3A) 40A ~ 65A
+/-(2%+/-30mA) 100mA ~ 10A (40Hz ~ 2KHz)
+/-(4%+/-30mA) 100mA ~ 10A (2KHz ~ 10KHz)
+/-(6%+/-30mA) 100mA ~ 10A (10KHz ~ 20KHz)
+/-(8%+/-30mA) 10A ~ 15A (40Hz ~ 20KHz)
+/-(2%+/-30mA) 200mA ~ 40A (40Hz ~ 1KHz)
+/-(4%+/-30mA) 200mA ~ 40A (1KHz ~ 2KHz)
+/-(6%+/-30mA) 200mA ~ 40A (3KHz ~ 5KHz)
+/-(8%+/-0.3A) 40A ~ 65A (40Hz ~ 20KHz)
Captured Conductor Size
Low Battery Indictor
red LED lighting
0Cto 50C 70% R.H.
-20C to +70C, 80% R.H.
9V DC, NEDA 1604, 6F22,0006P
100 hours typical with alkaline
250 gm typical
195mm(H) x 70mm(W) x 33mm(D)
Supplied with coil cable with straight banana plug or BNC plug
1 x Hantek CC-650 AC/DC Current Clamp Digital Multimeter with BNC Connector l
AC/DC Current Clamp