This dual output grounded DC power supply is of very high quality construction by Dr.Meter. Excellent for lab use with the variable 0-50 volt and 0-5 amp output. Other uses include science projects or any other use where stable DC power is required. The unit also has a switch to choose among INDEPENDENT, SERIES or PARALLEL operation which allows the choice of two independent 0-50V @ 0-5A outputs OR one 0-100V @ 0-5A output OR one 0-50V @ 0-10A output. The 2 digital LED meters display the actual voltage and current within 2 percent deviation. Both the voltage and the amperage are adjustable for BEST precision.
Heavy duty, stable output, low noise, low ripple voltage less than 0.5 mVp-p, overload protection circuit, state of art design and cooling heat sinks.
Triple output for 2X (0-50)V@(0-5)A
Output polarity : positive and negative
Low ripple voltage less than 1mVp-p
Overload protection circuit
With bright Back Light
State of art design
Series and parallel operation available
2 X Output Voltage : 0- 50V @ 0-5A
Output Current :0-5 A
Input Voltage: 110V, 60Hz
Constant Voltage / Constant Current
Voltage and Current Variable
Power effect: CV<0.01%+1mV, CC<0.2% + 1mA
Overload effect: CV<0.01% +3mV, CC<0.2% +3mA
Waves and noises: CV<0.5mV r.m.s, CC 3mA, r.m.s
Protection: High current limited.
Ripple & Noise: <1mV rms( I>3A), CV<0.5mV rms( I < 3A)
Digital Voltage and current meters built in with Voltage resolution: 2.5% of display reading; 2.5% of Current resolution: display reading
Environmental : 0 - 102 F ( 0 -40 C), relative humidity: <90%
Size: (mm) 362X 262X165, (inches) 141/4X101/4X61/2"
Weight: (Lbs) 29/ 15 kgs (30LBS)