Specification:
-DC Voltage: 400mv-400v ±?0.5%rdg+8dgt??1000v ±?0.8%rdg+8dgt)
-AC Voltage: 400mv ±?1.2%rdg+10dgt??4v-400v ±?0.8%rdg+10dgt??750v ±?1.2%rdg+10dgt?
-Resistance: 400?-4M? ±?1.0%rdg + 8dgt??40M? ±?1.5%rdg+15dgt?,
-DC Current: 400uA-400mA ±?1.2%rdg+8dgt?, 4A-20A ±?2.0%rdg+8dgt?
-AC Current: 400uA-400mA ±?1.5%rdg+8dgt?, 4A-20A ±?2.5%rdg+8dgt?
Display: 3999 counts, 3 1/2 digit LCD display
Hold Mode: ?
Max Value Hold:??
Auto power off:?
Back light: ?
NCV test: ?
Diode test: ?
Continuity test:?
Frequency test:?
Continuity: ?
Transistor: ?
Live Line testing: ?
Over load protection: ?
Short-circuit protection: ?
Low battery indication: ?
PC-Link(USB): ?
Notices:
1.To avoid harms to you or damage to the meter from electric shock, please do not attempt to measure voltage higher than DC/AC 1000v.
2.Do not rely on non contact voltage detector to determine whether there is a voltage. The detection operation may be affected by socket design, insulation thickness and type of different factors.
3.Before measuring current, check the meter's fuses and turn off power to the circuit before connecting the meter to the circuit.
Package Content:
1x HOLDPEAK 90EPC Digital Multimeter
1x 9V Battery
1x User's Manual
1x Test Lead
Non Contact Voltage Test(NCV): When the detection of voltage is greater than 90V(RMS), keep close to the conductor, the instrument sensor will light and buzz.
Over Load Protection & Continuity Test: Use the PTC protection circuit for resistance, temperature and frequency measurement. If measured resistance less than 100?, the buzzer will sound.
Auto-Ranging & Auto-Power Off: 4000 counts auto-ranging multimeter accurately measure AC/DC voltage, current, frequency, resistance, capacitance, diode.
Low Battery Indication & Blacklit LCD: 3 1/2 digit LCD display for visibility in dimly lit areas. Feature a low battery indicator so you never accidentally run out of juice.
Package Content: 1x HOLDPEAK 90EPC Digital Multimeter, 1x 9V Battery, 1x User's Manual, 1x Test Lead, 24 Month Warranty.