Working voltage: 80 ~ 260VAC
Working frequency: 50/60Hz
Power Consumption: 0.2W
Measurement speed: 2 times/s
Store data when power off
The blue backlight can be turned on/off manually
Test Range and Display format:
1.Power: test range: 0~22kW
< 1kW, display: 0.0~999.9W
1kW~10kW, display: 1000~9999W
> 10kW, display: 0.1~22.0kW
2.Energy: test range: 0~9999kWh
<10KWh, display: 0~9999Wh
>10kWh, display: 10~9999kWh
3.Voltage: test range: 80~260V(single-phase)
4.Current: test range: 0~100A
1. Please make sure the AC input is Pure Sine Wave.(Municipal electric power is pure sine wave). Please don't use the meter to measure AC power converterd from a DC-AC inverter UNLESS you can make sure the output from your DC- AC inverter is Pure Sine Wave. This is very importatnt.
2. Applied load should not exceed the rated power.
3. Wiring sequence can not be wrong.
4. This module is suitable for indoor, please do not use outdoor.
1x AC Power Multimeter
Voltage test range: One-Phase 80~260V AC Power, 50/60Hz; Current test range: 0~100A; Inner diameter of the CT: 15mm/0.6''.
Large-screen LCD, can display voltage, current, active power, energy at the same time.
The accumulated energy can be reset by button; Store data when power off; Voltage alarm function (over voltage alarm threshold, backlight and voltage will flash to alarm).
The blue backlight can be turned on/off manually. The CT can be either on Live line or Neutral Line.
The meter can only measure the active power(real power). It doesn't show Apparent power. If you measure power from a DC-AC inverter please make sure it's PURE SINE WAVE. Otherwise the meter can be burnt or melted.