? 33000 AC resistance readings, 6-bit DC voltage reading
? Resistance test range: 0.0001m?~3.3000k?
? Voltage test range: 0.00001V~400.000VDC
? 0.5% resistance accuracy
? 0.01% voltage accuracy
? HANDLER interface
? RS-232C and USB communication interface
? U disk real-time storage full touch operation
? Various contact resistance tests
? Determination of deterioration and life evaluation of alkaline batteries, lead storage batteries, and lithium batteries
? Battery factory inspection
? Super Capacitor Equivalent Resistance (ESR) Measurement
Parameters AC resistance, DC voltage
Accuracy Resistance: 0.5% Voltage: 0.01%
Range Resistance:0.0001m?~3.3000k? Voltage:0.00001V~400.000VDC
Signal Source 1kHz, frequency stability: 20ppm
Range Use the 7 range test,3m?~3k?
Speed The instrument is divided into four speeds: slow speed, medium speed, fast speed and high speed. Full channel open, and manual range mode: Slow speed: 3 times / sec Medium speed: 20 times / sec Fast: 40 times / sec High speed: 70 times / sec
Result Display Direct reading, ?ABS, ?%, ?, sorting result
Display Max Resistance?33,000 Voltage?400,000
Adjustment Short-circuit reset for all range
Comparator The instrument has a sorting function. RHI/RNG/RLO output. VHI/VNG/VLO output. Total NG/OK output Compare: Absolute Tolerance ±TOL Sort: The absolute deviation of measured value and nominal value is compared to the limits of each range. Percentage tolerance %TOL Sorting: The percentage deviation of the measured value and the nominal value is compared to the limits of each range. Sequential comparison sorting: the measured value is directly compared with upper and lower limits
Trigger Internal, manual,external and remote
Interface Handler interface (PLC),RS232C interface, USB iunterface
Voltage: 195VAC ~ 245VAC Frequency: 50Hz Power: up to 15VA
This instrument can test 0.0001m?~3.3k? resistance, 0.00001V~400.000V DC voltage, maximum resistance 33000 display digits, and maximum voltage 800000 display digits. The AT527/527B combines high-precision, high-resolution and ultra-high-speed measurement with 0.5% resistance accuracy and 0.01% voltage accuracy up to 70 times per second.
The instrument is used for professional sorting function, standard Handler (PLC) interface, separate output resistance HIGH / IN / LOW signal and voltage HIGH / IN / LOW signal, can fully cope with high-speed automatic sorting system to complete the automatic pipeline test, At the same time, the enhanced IO signal can directly drive the power relay and signal relay.
The instrument has built-in RS-232C interface and USB-232 interface. The instrument is equipped with universal data acquisition software, comes with database function and Excel.
The export function can be effectively applied to remote control and data acquisition and analysis.