? 30-channel resistance scanning measurement
? True color LCD display,
? Upper and lower limits of resistance can be set independently.
? With temperature compensation
? Keyboard lock
? Multiple winding transformer DC resistance measurement
? Coil DC resistance measurement
? Motors Multiple winding resistance measurement
Parameter DC resistance
Measurement Range 1???30K?
Signal Source Max current?<;1A
Range Automatic, manual and nominal range (the instrument automatically selects the best range based on nominal value)
Speed Slow speed: 10.2s/30 channels, medium speed: 2.49s/30 channels fast: 1050ms/30 channels, high speed: 690ms/30 channels
Result Display 30 channels direct reading display
Max Reading 30,000
Adjustment Short-circuit clear zero for each range; eliminate the influence of lead resistance.
Comparator The 30 channels are individually set and the instrument can be individually sorted for each channel. Unqualified (CH1-CH30): Low level output, indicating failure NG: All channels fail output.
Trigger Internal trigger; remote trigger; external trigger; manual trigger
Interface RS-232C interface (SCPI instruction set), HANDLER interface (PLC interface)
Temperature Accuracy: 0.2 °C Temperature range: 0~80 °C
Method 4-terminal shield per channel (including 2 detection terminals and 2 drive terminals)
True color LCD display, can set the upper and lower limits of resistance, with temperature compensation function ,keyboard lock
Voltage: 198VAC ~ 250VAC Frequency: 50Hz Power: up to 15VA
Outer dimensions (mm): 264 (width) x107 (height) x350 (depth) Inner dimensions: 216 (width) x 88 (height) x323 (depth) Weight: 4kg
Terminal test leads 30 pcs, ATL108 RS232Ccommunication cable AC Power cord
Please confirm the model number before purchase.
If you have any questions about the pro
AT5130 is a wide-range, multi-channel resistance tester that can scan and test 30 resistors. Controlled by high performance ARM microprocessors.
True color 3.5 inches LCD can display 30 resistors at the same time, and each channel can be set separately.
AT5130 can test 1???30K? resistors, maximum display is 30,000. At the same time, it also has a standard temperature compensation function, which can adapt to different requirements of the test.
Applied to automation equipment, HANDLER interface (PLC interface) is added to output GD/NG signal and RS-232C interface, support SCPI protocol and Modbus protocol (Modbus has become the national standard GB/T19582-2008) applied to automatic sorting system to complete automated assembly production line testing to improve production automation testing capabilities.