? High brightness, ultra clear four-color VFD Display.
? Auto Zero-Adjust for each range
? Comparator Function: Stores up to 30 sets of measurement conditions HI/IN/LOW/GD/NG VFD Show or HANDLER out.
? Four-terminal resistance measurement.
? Build-in RS-232C, Handler(EXT-I/O) Interface
? Beeper and brightness can be adjusted.
? Internal,Manual,External and Remote Trigger.
? USB Interface(Optional).
? SCPI compatible command sets.
? Keypad lock function.
? Data Hold function.
? Pure resistance
? the resistance of motor and transformer
? Enamel-insulated wire resistance.
? relay/switch connector contacts,
? PCB patterns,
? chip inductor DC resistance.
? Wire Resistance.
? Car,ship and plane fasten or secure resistance.
Parameter DC resistance
Measurement Range 0.1???110M?
Measurement current Current range: 1?A~1A
Range Automatic and manual with 11 ranges
Speed 167 times/second, 60 times/second, 10 times/second, 2 times/second
Display Show,?ABS,?% and sorting result
Display Max 104000
Adjustment Open & short reset
Comparator 30 groups record, NG-LO, GD-IN, NG-HI display and output, adjustable beep and volume
Trigger Internal, manual, external and remote
Interface RS232C?Handler Interface
Temperature compensation Accuracy:0.2 °C Ranger: 0?80 °C
Method 4 terminal shielding(2 check terminal and 2 driving terminal) and external shielding ground section
Voltage: 198V AC - 240V AC Frequency: 50Hz Power: Max 15VA
External size: 264mm (Width)x107mm (Height)x350mm (Depth) Inside size: 216mm (Width)x88mm (Height)x323mm (Depth) 4kg
Please confirm the model number before purchase.
If you have any questions about the product, please contact us.
Measure from very low (0.1??) to very high (110M?) with single instrument.
Along with capabilities for fast, precise measurements over a broad resistance range, AT512 also provides functions for comparator and PLC interface. Employing a four-terminal measurement method, AT512 is particularly suitable for measuring the resistance of motor and transformer windings, relay, switch and connector contacts, PCB patterns, inductor DC resistance and in shipping inspection tests.