LCD:2.4inch TFT?320x240?color LCD.
*WAVE:Waveform selection button:
-You can switch between sine, square wave, triangle wave, and any type of arbitrary wave.
-Change the selected channel signal type.
*MOD:Trigger and modulation function buttons
-Can set a specific number of pulse train output function?BURS?
-Modulation mode can be set :ASK,FSK,PSK,AM,FM,PM
*SWEEP:Sine, square, sawtooth and arbitrary waveform can be scanned.
-Supports scanning of four parameters of frequency, amplitude, offset, and duty cycle.
Supports two linear and logarithmic scanning methods.
*COUNTER:Can switch to frequency meter and counter function, measure frequency, period, duty cycle, positive pulse width of external input signal
-Supports DC and AC signal input.
- Supports 1 s, 10 s and 100 s gate time switching.
- Dual channel output can work with frequency meter measurement
*VCO function can be set
-Support VCO voltage control signal generator's frequency, amplitude, offset, duty cycle and other parameter output functions (such as voltage-controlled oscillator).
- Support Chinese and English switching
-Support tone off/on
-Supports multi-machine cascading
- Supports master/slave switch over in cascaded state
- Supports dual-channel power-on default output state setting
BNC connector, nominal output impedance 50?.
Type (Optional):30MHz US plug, 30MHz EU plug, 60MHz US plug,
60MHz EU plug, 30MHz UK plug, 60MHz UK plug
1 x FY6800 signal generator
1 x USB communication cable
1 x BNC test cable
1 x Q9 clip cable
1 x Power cable