Airlaiona DSO-SHELL DSO150 15001K DIY Digital Oscilloscope Kit With Housing
Price:
$44.98
As of 2020-12-15 10:26:13 UTC (more info)
Product prices and availability are accurate as of 2020-12-15 10:26:13 UTC and are subject to change. Any price and availability information displayed on https://www.amazon.com/ at the time of purchase will apply to the purchase of this product.
Availability:
Not Available
Discontinued
Product Information (more info)
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.
Manufacturer Description
Band Width : Less than 60MHz
Display Size : 3.0 - 4.9 Inches
Digital Channels : 1
DIY Supplies : Electrical
Record Length : as the description
Model Number : as the description
Real Time Sampling Rate : as the description
Display resolution : as the description
This DIY digital oscilloscope kit adopts ARM Cortex-M3 processor and with 2.4-inch TFT screen and protective case. It\'s easy and reliable for circuit operation. It can display waveform parameters, such as frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values.Features:Adopt ARM Cortex-M3 processor (STM32F103C8), and include a 2.4-inch color TFT display screen.Used for secondary development on the basis of this kit, for example, it can be changed to Millivoltmeter, data loggers.Come with instructions, easy to install and operate. With Auto/Normal/Single trigger modes, easy to capture the moment waveform.Available rising or falling edge trigger.Observable previous waveform before trigger(negative delay).Can freeze waveform display at any time(HOLD function).With waveform parameter digital display, including frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values.Waveform storage function: will not lose the waveform after power off.Short-circuit and open-circuit detection: can help the user find out the soldering error.TFT controller recognition function.The SMD has been soldered, more suitable for electronic beginner.Specifications:Maximum Real-time Sampling Rate: 1MSa/sAnalog Bandwidth: 0-200KHzSensitivity Range: 5mV/div-20mV/idvMaximum Input Voltage: 50Vpk (1X probe)Input Impedance: 1M ohms/20pFAccuracy: 12 BitsRecord Length: 1024 pointsCoupling Modes: DC / AC / GNDTime Base Range: 500s/Div - 10us / Div Trigger Modes: Auto, Normal, and SingleTrigger Position: Center of BufferSupply Voltage: DC 9V(8-10V)Current Consumption:~120mA @ 9VMain Board Size: 94 * 65mm / 3.7 * 2.56inAnalog Board
Display Size : 3.0 - 4.9 Inches
Digital Channels : 1
DIY Supplies : Electrical
Record Length : as the description
Model Number : as the description
Real Time Sampling Rate : as the description
Display resolution : as the description
This DIY digital oscilloscope kit adopts ARM Cortex-M3 processor and with 2.4-inch TFT screen and protective case. It\'s easy and reliable for circuit operation. It can display waveform parameters, such as frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values.Features:Adopt ARM Cortex-M3 processor (STM32F103C8), and include a 2.4-inch color TFT display screen.Used for secondary development on the basis of this kit, for example, it can be changed to Millivoltmeter, data loggers.Come with instructions, easy to install and operate. With Auto/Normal/Single trigger modes, easy to capture the moment waveform.Available rising or falling edge trigger.Observable previous waveform before trigger(negative delay).Can freeze waveform display at any time(HOLD function).With waveform parameter digital display, including frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values.Waveform storage function: will not lose the waveform after power off.Short-circuit and open-circuit detection: can help the user find out the soldering error.TFT controller recognition function.The SMD has been soldered, more suitable for electronic beginner.Specifications:Maximum Real-time Sampling Rate: 1MSa/sAnalog Bandwidth: 0-200KHzSensitivity Range: 5mV/div-20mV/idvMaximum Input Voltage: 50Vpk (1X probe)Input Impedance: 1M ohms/20pFAccuracy: 12 BitsRecord Length: 1024 pointsCoupling Modes: DC / AC / GNDTime Base Range: 500s/Div - 10us / Div Trigger Modes: Auto, Normal, and SingleTrigger Position: Center of BufferSupply Voltage: DC 9V(8-10V)Current Consumption:~120mA @ 9VMain Board Size: 94 * 65mm / 3.7 * 2.56inAnalog Board
Product Features
Airlaiona Electronics
