4.The FY2000S series has the functions of frequency sweeping, easy to use, high signal stability, adjustable amplitude and DC bias of output signal.Supporting Linear Scanning and Logarithmic ScanningThe scanning frequency range and scanning time can be set arbitrarily.
5.It is an ideal equipment for electronic enthusiasts, laboratories, production lines, teaching and scientific research. It can also be used as a supporting module of industrial equipment.
Brand Name: FellTech
Product Name: DDS Function Signal Source Generator
Model Number: FYA20A0S
Application: Electronic Test and Design, Sensor Simulation and Test, Piezoelectric Components Selection and Test, Power Device and Circuit Driving, Education and Training
Output Channel: One Main Waveform Output and Two Ttldifferencelevel Output
Output Waveform: Sinusoidal Wave, Square Wave (duty Cycle Adjustable), Triangular Wave, Ascending Sawtooth Wave,reduced Saw Tooth Wave
Output Amplitude: More Than 10vp-p(no Load)
Output Impedance: 50 Ohm + 10%
Dc Offset: + 3v
Frequency Resolution: 0.01hz (10mhz)
Frequency Accuracy: + 5 x 10-6
Frequency Stability: + 2 x 10-6/3 Hours
Sinusoidal Distortion: Less Than 0.8%(reference Frequency)1khz)
Triangular Wave Linearity More Than 98%(0.01hz~10khz)
Time of Rise and Fall of Square Wave: ?50ns
Scope of Square Wave Duty Cycle: 1%~99%
Package Size: 150x80x50mm/5.91x3.15x1.97in
Package weight: 600g/1.32oz
General Box Package
1 x Signal Power Amplifier Module
1 X Set of Accessories
1.Small size, many functions, easy to carry. This can send commands through the computer to control the work of the instrument.
2.Frequency accuracy can reach 10-6 orders of magnitude. Full range frequency resolution 10mHz.
3.Full range frequency is not divided, direct digital setting. The output waveform is synthesized by the calculated value of the function, the waveform accuracy is high, and the distortion is small.
4.Multiple waveforms are sine, square wave, triangle wave, sawtooth wave, dual TTL level differential output.
5.With frequency scanning function, the scan start and end points can be set arbitrarily.