Bias Adjustment Range:
Phase Adjustment Range:0~359.99°
Frequency Measuring Range:GATE-TIME=1S 1Hz - 60MHz
Input Voltage Range:2Vpp~20Vpp
Periodic Measurement:20ns Resolution, the Max. Measurable 40s
Scan Mode:Linear Sweep, Log Sweep
Scan Object:Frequency, Amplitude, Bias and Duty Cycle
Frequency Setting Range:Start Point and End Point can be set freely
Frequency Scan Range:It is determined by the sweep parameter settings
Interface Mode:Using USB to Serial Interface
Protocol:Using the Command Line, the Agreement Public
Voltage Range:AC 100~240V
Display Type:2.4" TFT Color Display
Environment Temperature: 0~40°C:Humidity: <80%
General Box Package
1 x Signal Source Generator
1 x Power Cable
1 x USB Data Cable
1 x BNC-BNC Cable
2 x BNC-Clip Cable
1 x Instruction manual
1.Adopt the Direct Digital Synthesizer(DDS) technology and provide stable, precise, pure and low distortion signals.
2.2.4 inch TFT color LCD with 320*240 resolution, simultaneously display parameters and graphics of CH1 and CH2.
3.Use soft silicone keys instead of traditional patch keys, longer service life and more comfortable to operate the instrument.
4.Use 14-bit high-speed D/A converter chip(5Vpp output quantization error is less than 1mV), 250MSa/s sampling rate and 14bits vertical resolution.
5.Can output up to 98 groups of functions/arbitrary waveform: 34 groups of preset waveform and 64 groups of user-defined waveform.